Camshaft Sprocket Bolt - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-53

CAMSHAFT SPROCKET BOLT

Intake Flange Shaft Bolt
Tightening Torque
Notice: The sprocket bolts are designed to be
used only once, so always replace with new one.
C. M7 x 13 Collar Bolt Torx-T30
e. 6.8 mm
16. Flange Shaft
YAD1B0G0
18. Control Piston
22. Intake Camshaft
Exhaust Camshaft Sprocket Bolt
Tightening Torque
Notice: The sprocket bolts are designed to be
used only once, so always replace with new one.
E. M7 x 13 Collar Bolt Torx-T30
e. 6.8 mm
13a. Camshaft Sprocket
22a. Exhaust Camshaft
YAD1B0H0
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step:60° ± 5°
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step:60° ± 5°