SSANGYONG Rexton Y200 Manual page 222

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-61
5. Install the engine lock 602 589 00 40 00 to the
ring gear to prevent the crankshaft from rotating.
6. Blow up with compressed air.
YAD1B680
7. Install the supporting bar 111 589 01 59 00 (d)
and the lever pusher 111 589 18 61 00 (a).
8. Mount the thrust piece 111 589 25 63 00 (b)
vertically to the valve spring retainer (2).
9. Press the valve spring (3) by using the lever
pusher 111589 18 61 00 (a).
10. Remove the valve cotter (1) using the pincette.
11. Remove the upper retainer (2) and the valve spring
(3).
YAD1B1E0
12. Remove the valve stem seal (4) and replace if
necessary.
Notice: Check the valve stem seal for damage
and replace if necessary.
13. Remove the lower retainer (5).
Notice: Check the retainer for damages and
replace with a new one if necessary.
14. Installation should follow the removal procedure
in the reverse order.
YAD1B1F0