SSANGYONG Rexton Y200 Manual page 212

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-51
Removal & Installation Procedure
1. Turn the crankshaft and position the no.1 cylinder
piston at ATDC 20 ° .
Notice: Turn the crankshaft in the direction of
engine rotation.
2. Remove the cylinder head front cover.
YAD1B6D0
3. Put the alignment marks (arrows) on the camshaft
sprocket and the timing chain.
YAD1B6F0
4. Insert the holding pin 111 589 03 15 00 into the
no.1 and no.6 bearing cap hole on camshaft to
secure intake and exhaust camshaft.
5. Remove the chain tensioner.
YAD1B6E0
6. Unscrew the exhaust sprocket bolt and remove
the exhaust camshaft sprocket.
Installation Notice
Tightening Torque
Notice: The flange bolt is designed to be used
only once, so always replace with new one.
YAD1B6G0
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step:60° ± 5°