SSANGYONG Rexton Y200 Manual page 1066

5A-198 AUTOMATIC TRANSMISSION
21. Install solenoid 5. Ensure that the solenoid is
pushed firmly into the valve body by the retainer
and that the screw is tightened to specification.
Installation Notice
Tightening Torque
KAA5A1W0
22. Install the detent spring assembly (spring, support
plate and screw), ensuring that the screw is tight-
ened to specification. Check the spring for wear
or damage.
Installation Notice
Tightening Torque
KAA5A1X0
23. Install the manual shift valve.
Notice: Be aware that the manual valve will fall out
of the valve body.
KAA5A1Y0
24. Align the valve body assembly on the transmission
case and install the manual valve lever to manual
valve link. Fit the long end of the link to the manual
valve first. Install the securing bolts and tighten
to specification in the specified sequence.
Installation Notice
Tightening Torque
KAA5A1Z0
8-12 N•m (71-106 lb-in)
20-22 N•m (15-16 lb-ft)
8-13 N•m (71-115 lb-in)
SSANGYONG Y200