SSANGYONG Rexton Y200 Manual page 872

SSANGYONG Y200
Installation Procedure
1. Install the wheel cylinder to the backing plate.
Installation Notice
Tightening Torque
YAD4C400
2. Install both brake linings between the wheel
cylinder and the bottom anchor plate. And then
install adjuster and each return spring.
YAD4C410
3. Connect the parking cable.
YAD4C420
4. The outside diameter of the lining set to Ø 253.08
- Ø 253.50 mm by rotating the adjuster screw.
YAD4C430
REAR BRAKE 4C-19
8 - 12 N•m
(71 - 106 lb-in)