SSANGYONG Rexton Y200 Manual page 264

Surface Grinding Machine
SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-103
Measurement of Mating Surfac
1. Measure the height (H) of the cylinder head (refer
to Service data standard).
2. Check the mating surface of the cylinder head.
3. Mill the sharp edge of the combustion chamber.
4. Re-measure the height (H) of the cylinder head.
5. Seal the intake and exhaust valves.
6. Measure the dimension (T) between the camshaft
bearing and the valve system (refer to Service data
standard).
7. Mill the cylinder head valve seat (refer to Service
data standard).
Universal Tool
Sceledum, Type RTY
Roaro
Schio / Italy