Cooling Fan - SSANGYONG Rexton Y200 Manual

1F2-62 M161 ENGINE CONTROLS
Failure
Description
Code
Cooling fan (HI ) relay
44
short circuit to power
Cooling fan (HI ) relay
short circuit to ground
45
or open
Circuit Description
Ignition voltage is supplied directly to the cooling fan relay coil. The ECM controls the relay by grounding the
control circuit. When the ECM is commanding a command ON, the voltage of the control circuit should be low
(near 0 volt).
When the ECM is commanding the control circuit should be high (near battery voltage). If the fault detection circuit
senses a voltage other than what is expected, the fault line status will change causing the fault code to set.

COOLING FAN

Trouble Area
Cooling fan short circuit to
power
Cooling fan short circuit to
ground or open
Maintenance Hint
•
Inspection the Engine Control Module
(ECM) pin 35 about short circuit or open
with bad contact
•
Inspection the power source
•
Inspection the cooling fan
•
Inspection the ECM
YAD1F510
SSANGYONG Y200