SSANGYONG Rexton Y200 Manual page 801

3D-10 REAR AXLE
Installation
Clean the detached axle shaft, check the damage or
wear.
1. After checking the spline & shaft of rear axle shaft,
assemble the shaft into the rear axle housing.
YAD3D110
2. Tighten the flange fixing bolts and washers with
the retainer plate.
Installation Notice
Tightening torque
YAD3D120
3. Assemble the plastic plug n the rear axle flange
and install the dust shield.
Installation Notice
Tightening torque
YAD3D130
4. Install the brake disc and caliper assembly.
Installation Notice
Tightening torque
5. Install the parking brake cable and tire.
YAD3D140
50 - 65 N•m
(37 - 48 lb-ft)
4 - 8 N•m
(35 - 71 lb-in)
85 - 105 N•m
SSANGYONG Y200