SSANGYONG Rexton Y200 Manual page 200

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-39
Tools Required
601 589 03 14 00 Crankshaft Front Seal Installer
Replacement Procedure
1. Remove the radial seal with a screw driver.
Notice: Use a clean cloth not to damage the radial
seal mounting hole and the crankshaft.
2. Coat the radial sealing lip with engine oil.
3. Using the crankshaft front seal installer 601 589
03 14 00, assemble the radial seal.
4. Align the sleeve groove and the woodruff key and
YAD1B800
tighten the center bolt until the center bolt and
the damper disk stop in the movement.
Installation Notice
Tightening Torque
5. Remove the crankshaft front seal installer 601 589
03 14 00, and install the belt pulley and the
vibration damper.
6. Check for leaks while operating the engine.
1st step: 200 + 20 N•m
(148 + 15 lb-ft)
2nd step: 90° ± 10°