Tdc(Tdc Sensor Bracket) Setting - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

Preceding Work:

Removal of No.1 cylinder prechamber

1 Measuring Device

2 Dial Gauge

The TDC sensor bracket must be adjusted in case of followings.

When replacing the TDC sensor bracket.

When replacing the crankshaft, the hub or the vibration damper.

When replacing or installing the timing case cover.

After engine overhauling.

If the cylinder head is removed, the measuring pin of the dial gauge can be positioned on the piston crown.

This is done by placing the magnetic dial holder on the mating surface of the crankcase.

SSANGYONG Y200

TDC (TDC SENSOR BRACKET) SETTING

DIESEL ENGINE MECHANICAL 1B3-133

3 Cylinder Head

4 Piston ................................................ Set at TDC

Chapters

Table of Contents