1B3-86 DIESEL ENGINE MECHANICAL
6. Coat the cylinder bore, connecting rod bearing
journal, connecting rod bearing shell and piston
with oil.
7. Compress the piston rings with a tensioning strap
000 589 04 14 00.
YAD1BFQ0
8. Insert the piston assembly into the cylinder with a
wooden stick (18).
Notice: The arrow on the piston crown must point
toward the front of vehicle.
YAD1BFR0
9. Insert the connecting rod bearing shells (9, 10).
Notice: Be careful of the difference in upper and
lower bearing shells and not to be changed.
10. Position the connecting rod bearings caps.
Notice: Position so that the retaining lugs are on
the same side of the connecting rod bearing
(arrow).
YAD1BFS0
11. Measure stretch shaft diameter (C) of the
connecting rod bolts.
YAD1BFT0
Limit 'C'
7.1 mm
SSANGYONG Y200