SSANGYONG Rexton Y200 Manual page 293

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-25
6. Pull off the tensioning lever (4) from guide rail pin.
7. Remove the spring (17).
Notice: Insert spring (17) with color coding (blue/
violet) facing up.
YAD1BB90
8. Pry off the closing cover (12) and remove the
socket bolt (11) and then remove the tensioning
pulley (10).
Installation Notice
Tightening Torque
YAD1BBA0
9. Pry off the closing cover (16) and remove the fit
bolt (15).
Installation Notice
Tightening Torque
Apply loctite on thread of fit bolt.
10. Remove the tensioning lever (14) and washer (13).
11. Clean thread in the timing case cover and fit bolt.
YAD1BBB0
12. Installation should follow the removal procedure
in the reverse order.
29 N•m (21 lb-ft)
100 N•m (74 lb-ft)