Table of Contents
Advertisement
1F3-40 DIESEL ENGINE CONTROLS
Adjustment Procedure
1. Remove the bolt (3) at the supporting bracket.
Installation Notice
Tightening Torque
YAD1FBT0
2. remove the bolts (1) at the timing case cover.
Installation Notice
Tightening Torque
YAD1FBU0
3. Run the engine at idle speed.
4. Turn the adjusting screw (2) until the specification
(15° ± 1° ATDC) is indicated on the digital tester.
To the Right
To the Left
YAD1FBV0
23 N•m (17 lb-ft)
23 N•m (17 lb-ft)
Start of Delivery Retarded
Start Delivery Advanced
SSANGYONG Y200
Advertisement
Chapters
Table of Contents
