SSANGYONG Y200
3. Remove mounting bolts and nuts of the lower arm
(both front and rear) and separate the lower arm.
YAD2C250
Installation Procedure
1. Install the lower arm to the frame bracket and
tighten the mounting bolt and nut as the specified
torque.
Notice :
•
Tighten the bolt on the direction from rear side
to front side of the vehicle.
•
Fix the bolt center with the bracket indication.
Installation Notice
Tightening Torque
YAD2C260
2. Install the upper arm to the frame bracket.
Installation Notice
Tightening Torque
YAD2C270
3. Install the knuckle assembly to the shaft and insert
the ball joint of the upper/lower arm. And then
tighten the slotted nut and split pin.
Installation Notice
Slotted nut
Tightening
Torque
YAD2C280
FRONT SUSPENSION 2C-15
160 - 170 N•m
110 - 130 N•m
Upper side (1)
110 - 120 N•m
Lower side (2)
110 - 130 N•m