SSANGYONG Rexton Y200 Manual page 728

SSANGYONG Y200
3. Insert the upper side of the shock absorber to the
frame and tighten nuts manually. And then install
the lower side's to the axle and tighten nuts as
specified torque.
Installation Notice
Upper side (1)
Lower side (2)
YAD2D220
4. Install the upper arm to the frame bracket and the
axle. And then tighten bolts as specified torque.
Installation Notice
Tightening Torque(frame(1))
Tightening Torque(axle(2))
YAD2D230
5. Install the lower arm to the frame bracket and the
axle. And then tighten bolts as specified torque.
Installation Notice
Tightening Torque(frame(1))
Tightening Torque(axle(2))
YAD2D240
6. Install the lateral rod to both the frame and axle
side.
Installation Notice
Tightening Torque(frame(1))
Tightening Torque(axle(2))
YAD2D250
REAR SUSPENSION 2D-13
Tightening Torque : 30 - 45 N•m
(22 - 33 lb-ft)
Tightening Length : 6 - 9 mm
Tightening Torque : 50 - 65 N•m
(37 - 48 lb-ft)
165 N•m
165 N•m
165 N•m
165 N•m
165 N•m
165 N•m