SSANGYONG Rexton Y200 Manual page 355

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-87
12. Coat the bolts (12) with oil and then tighten the
bolts.
Installation Notice
Tightening Torque
13. Rotate the crankshaft and check axial clearance
between the connecting rod and crankshaft.
YAD1BFU0
14. Measure clearance between the piston crown and
cylinder.
YAD1BFV0
15. Position the piston at TDC and measure the
distance between the piston crown and the
crankcase surface using dial gauge 001 589 00
53 21 and dial gauge holder 363 589 02 21 00.
Notice: Measure at points marked.
YAD1BFW0
35 N•m (26 lb-ft)+ 90°
Standard Max. 0.12 mm
Standard Max. 0.965 mm