SSANGYONG Rexton Y200 Manual page 778

SSANGYONG Y200
3. Apply the specified grease to the joint housing.
Injection quantity
Notice: If not use the specified grease, the joint
and boot may be damaged.
Notice: For assembly, replace the boot clamp with
the new one.
YAD3A750
4. Check the followings after completing the
assembly.
•
Check whether the joint move to up/down, left/
right, forward freely.
•
Check whether the grease leak in the clamp part
after checking the operation.
Notice: Because the wheel joint cannot be repaired
in single par t, if there is defect, replace it whit the
new assembly.
YAD3A760
FRONT AXLE 3A-29
80 - 90 g