SSANGYONG Rexton Y200 Manual page 1056

5A-188 AUTOMATIC TRANSMISSION
C1 Clutch Overdrive Shaft and Input Shaft
Assembly
Tools Required
0555-336260
Notice:
•
Ensure that the snap rings are fitted correctly.
•
Check pistons for cracks, especially the C1 piston.
•
Do not mix clutch piston return springs.
•
If the C1/C2 clutch packs separate from the C3
clutch pack, make sure the No. 6 bearing doesn't
drop out of the bearing retainer.
1. Check the overdrive shaft grooves for any defect.
2. Coat the sealing rings, large and small, with petro-
leum jelly and fit them to the overdrive shaft. The
sealing rings may be held in place with a small
amount of petroleum jelly.
KAA5A0X0
3. Assemble the clutch plate and disc into the cylinder
in the following sequence:
•
Steel plate
•
Friction disc
•
Steel plate
•
Friction disc
•
Steel plate
•
Steel plate ( 0574-000013, `014, `015, `016, `019,
`022), or friction disc (0574-000012 & `017)
•
Steel plate (selective)
•
Friction disc
•
Steel plate (selective)
KAA5A0Y0
•
Friction disc
Clutch Pack Clearance Kit
SSANGYONG Y200