1 Oil Dipstick Level Gauge
2 Oil Dipstick Guide Tube
3 O-Ring
SSANGYONG Y200
OIL DIPSTICK GUIDE TUBE
Removal & Installation Procedure
M161 ENGINE MECHANICAL 1B2-95
4 Bolt (M6 X 16, 1 piece)
.................................... 9 - 11 N•m (80 - 97 lb-in)
5 Clamp
1. Pull out the oil dipstick level gauge (1).
2. Unscrew the bolt (4) and remove the oil dipstick
guide tube (2).
Installation Notice
Tightening Torque
It is very hard to remove the oil dipstick guide
tube without special tool. If it is not necessary,
do not remove the guide tube.
3. Installation should follow the removal procedure
in the reverse order.
4. Check for leaks by starting the engine.
YAD1B8A0
9 - 11 N•m
(80 - 97 lb-ft)