Brake Fluid Reservoir - SSANGYONG Rexton Y200 Manual

4A-16 BRAKE SYSTEM
4. Installation should follow the removal procedure
in the reverse order.
YAD4A300

BRAKE FLUID RESERVOIR

Removal & Installation Procedure
1. Remove the reservoir tank cap and drain the brake
fluid completely.
2. Remove the brake reservoir tank using the driver.
Notice: Note that pulling the reservoir tank out
excessively result in damage of the tank on
removal.
YAD4A310
3. Remove the grommet from the master cylinder.
YAD4A320
4. Installation should follow the removal procedure
in the reverse order.
Notice:
•
Lubricate the new brake fluid reservoir seals with
clean brake fluid.
•
After the installation, bleed the brake system.
YAD4A330
SSANGYONG Y200