SSANGYONG Rexton Y200 Manual page 867

4C-14 REAR BRAKE
3. Remove the brake pad and replace the new pad.
YAD4C220
4. Install the caliper cylinder assembly and tighten
the retaining bolt.
YAD4C230
Installation Procedure
1. Install the brake lining between the backing plate
and the flange.
Installation Notice
Tightening Torque
Notice: Apply a certain amount of grease on the
parking brake lining surface.
YAD4C240
2. Install the brake disc and connect the parking
brake cable to the lever.
YAD4C250
4 - 8 N•m
(35 - 71 lb-in)
SSANGYONG Y200