SSANGYONG Rexton Y200 Manual page 1068

5A-200 AUTOMATIC TRANSMISSION
6. Fit the oil pan assembly to the transmission case
and tighten the securing bolts to specification and
sequence Do not over torque.
Installation Notice
Tightening Torque
KAA5A2C0
Torque Converter and Housing Assembly
1. Locate the torque converter housing on the trans-
mission main case.
2. Apply additional Loctite 202 or equivalent as
required to the converter housing to case bolts.
Install and tighten bolts to specification.
Installation Notice
Tightening Torque
•
All the hardware must be correctly installed and
torqued to specification.
3. Fit the converter ensuring that the tangs are
KAA5A2D0
engaged in the pump gear. Ensure that the tangs
do not contact the pump seal.
Output Flange Assembly (2WD Mode)
1. Position the transmission detent lever into the park
position and lock the output shaft.
2. Clear the threads on the output shaft and apply
Loctite 243 or equivalent as required to threads.
3. Install the flange, 'O' ring and torque the nut to
specification.
Installation Notice
Tightening Torque
KAC5A040
KAC5A040
4-6 N•m (35-53 lb-in)
54-68 N•m (40-50 lb-ft)
35 N•m (26 lb-ft)
SSANGYONG Y200