Unit Repair; Milling Of Prechamber Sealing Surface - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

1B3-130 DIESEL ENGINE MECHANICAL

3 Milling Cutter

Notice: The prechamber sealing surface may only be remachined once with the cylinder head fitted. It is essential

to adhere to the specified projection 'C' of the prechamber of 7.6 - 8.1mm.

This ensures that the required clearance exists between prechamber and piston crown with the piston in TDC. For

this reason, spacer rings should be inserted on remachined sealing surfaces.

Thickness of spacers

If a spacer ring is already fitted, or a marking is made on the cylinder head, the cylinder head must be removed

and size 'C' measured if further remachining is necessary on a prechamber sealing surface.

UNIT REPAIR

0.3, 0.6, 1.0 mm

4 Counter Sink (Special Tool - 601 589 00 66 00)

5 Cylinder Head

SSANGYONG Y200

Table of Contents