SSANGYONG Rexton Y200 Manual page 352

1B3-84 DIESEL ENGINE MECHANICAL
Tools Required
000 589 04 14 00 Tensoning Strap
001 589 53 21 00 Dial Gauge
363 589 02 21 00 Dial Gauge Holder
Removal Procedure
1. Remove combustion residues from the cylinder
bores.
2. Remove the connecting rod bolts (12) and then
remove the connecting rod bearing caps (11).
YAD1BFG0
3. Remove the connecting rod bearing shells (9, 10).
Notice: Be careful not mix the bearing caps and
shells each other.
YAD1BFH0
4. Remove the piston (6) and connecting rod (8).
YAD1BFJ0
5. Remove the snap ring (4) and pull out the piston
pin (5).
6. Separate the piston and connecting rod.
YAD1BFK0
SSANGYONG Y200