SSANGYONG Rexton Y200 Manual page 832

4A-18 BRAKE SYSTEM
•
Check the cylinder for excessive wear.
Notice:
•
Replace the cylinder assembly when there
occurs any damage or wear in the cylinder.
•
Clean the contaminated oil of the assembly.
•
Install the 1st piston and 2nd piston assembly
from the master cylinder assembly.
YAD4A380
Installation Procedure
1. Install the retainer ring using the snap ring plier.
YAD4A390
2. Install the master cylinder into the booster.
Installation Notice
Tightening Torque
YAD4A400
3. Install the master cylinder completely and then
connect the brake pipe.
Installation Notice
Tightening Torque
YAD4A410
8 - 12 N•m
(71 - 106 lb-in)
15 - 18 N•m
(11 - 13 lb-ft)
SSANGYONG Y200