SSANGYONG Rexton Y200 Manual page 888

TRACTION CONTROL SYSTEM
(TCS) DESCRIPTION
General Information
The traction control system (TCS) is a traction system
by means of brake intervention only, available in a low
speed range (< 60 kph).
It works on µ-split roads with sidewise different friction
coefficients.
The spinning driven wheel is braked and the drive
torque can be transferred to the wheel on the high-µ
side. During TCS active, the TCS information lamp is
blinking.
Ignition ON
2 second on
ABS Warning
for lamp
Lamp
check
2 second on
TCS Info
for lamp
Lamp
check
2 second on
EBD Warning
for lamp
Lamp
check
SSANGYONG Y200
ABS TCS
Operation Operation
OFF OFF
Blinking
OFF
(FLASHING)
EBD
OFF
operation/OFF
The temperature of the brakes is calculated by a
mathematical model and TCS is switched passive if
the calculated temperature is greater than a threshold
value (500 °C). TCS is permitted again, when the
calculated temperature is less than 350 °C.
Lamp Concepts
The system is equipped with an TCS information lamp,
which is blinking during TCS operation.
The activation of the EBD, TCS warning lamp and the
TCS info lamp is summarized in the following table:
System Failure (EBD,
ABS or TCS are Not
Distinguished)
ON
OFF
ON
ABS AND TCS 4E-3
TCS Passive Due to
Temperature Model
OFF
ON
OFF