Prechamber - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

SSANGYONG Y200

DIESEL ENGINE MECHANICAL 1B3-47

PRECHAMBER

Preceding work: Removal of glow plug

Tools Required

603 589 00 09 00 Serration Wrench

667 589 03 63 00 Sliding Hammer

Removal Procedure

1. Using the serration wrench 603 589 00 09 00 (4),

remove the threaded ring (1).

2. Install the sliding hammer 667 589 03 63 00 (5)

into the prechamber.

3. Remove the perchamber (2).

Notice: After removing the prechamber, cover over

the bores with clean rag.

4. Inspect the prechamber.

Notice: If the prechamber seats in the cylinder

head are leaking or if the prechambers are

replaced, the sealing surfaces in the cylinder head

must be remachined.

Removal of fuel injection nozzle

Table of Contents