SSANGYONG Y200
7. Tighten the front disc brake caliper assembly
mounting bolts on condition that the front disc is
mounted.
Installation Notice
Tightening Torque
YAD3A270
8. Inser t the steering linkage ends to the steering
knuckle and tighten the slot nut.
Notice: When you install, replace the split pin with
new one.
Installation Notice
Tightening torque
YAD3A280
9. Install the wheel speed sensor and connect the
vacuum line (with ABS only).
Installation Notice
ABS wheel speed
sensor mounting bolt
YAD3A290
10. Install the tire and test the braking force.
FRONT AXLE 3A-17
85 - 105 N•m
35 - 45 N•m
(26 - 33 lb-ft)
6 - 8 N•m
(53 - 71 lb-in)