SSANGYONG Rexton Y200 Manual page 213

1B2-52 M161 ENGINE MECHANICAL
7. Unscrew the bolt (3) from the armature (4) and re
ove the roll pin, and remove the armature.
Installation Notice
Tightening Torque
8. Unscrew the nut (6) and remove the seal cover
(7).
Installation Notice
Tightening Torque
Notice: Put the locking slot of nut toward
YAD1B7B0
armarture.
9. Take off the timing chain from intake camshaft
sprocket.
10. Remove the adjuster piston (9) and conical spring
(10) from intake camshaft sprocket.
11. Unscrew the bolt (11) and remove the flange shaft.
Installation Notice
Tightening Torque
Notice: The flange bolt is designed to be used
only once, so always replace with new one.
12. Installation should follow the removal procedure
in the reverse order.
YAD1B7C0
13. Check and adjust the camshaft timing.
35 N•m (26 lb-ft)
60 - 70 N•m
(44 - 52 lb-ft)
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step:60° ± 5°
SSANGYONG Y200