SSANGYONG Rexton Y200 Manual page 327

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-59
Tools Required
103 589 00 33 00 Puller
601 589 03 14 00 Sleeve
602 589 00 40 00 Engine Lock
Removal Procedure
1. Remove the starter motor and install the engine
lock 602 589 00 40 00 into the flywheel ring gear.
2. Remove the poly V-belt.
3. Remove the cooling fan.
Notice: Keep the fan in vertical position.
YAD1BC40
4. Remove the cooling fan belt pulley (2).
5. Place alignment marks (arrow) on the vibration
damper (5) and crankshaft belt pulley (4).
YAD1BDR0
6. Remove the timing sensor bracket.
Notice: Remove if necessary.
YAD1BDS0
7. Remove the socket bolts (3) and then remove the
belt pulley (4) and vibration damper (5).
YAD1BDT0