SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-153
Measurement Procedure
1. Measure height 'A'.
Notice: If the height is less than 142.5 mm,
replace the cylinder head.
YAD1BK50
2. Insert the valve (1) and measure valve arrears 'a'.
Valve Arrears 'a'
Notice: If out of standard, machine the valve seat.
YAD1BJS0
3. Install the prechamber and measure protrusion 'c'
Protrusion 'c'
4. Assemble the engine and check the valve timing.
YAD1BK60
Limit
142.5 mm
0.1 - 0.7 mm
7.6 - 8.1 mm