SSANGYONG Rexton Y200 Manual page 1064

5A-196 AUTOMATIC TRANSMISSION
8. Install the 3-4 shift valve and retaining pin.
KAA5A1S0
9. Install the Clutch Apply Regulator (CAR) valve,
springs, plunger and retaining pin.
KAA5A1T0
10. Install the solenoid supply valve, spring and
retaining plate.
Notice: This aluminum valve is easily damaged.
11. Install solenoid 6 plunger, spring and retaining pin.
KAA5A1U0
12. Position the third feed ball (large nylon) in the valve
body and install the solenoid 6 filter.
13. Check the separator plate for burrs and damage.
Repair or replace the separator plate as
necessary.
14. Check the upper and lower valve body gaskets
for damage. Replace the gaskets as necessary.
15. Install the lower valve body gasket on the lower
valve body.
KAA5A850
SSANGYONG Y200