SSANGYONG Rexton Y200 Manual page 686

1F3-62 DIESEL ENGINE CONTROLS
5. Coat the new seal (23) with engine oil and install
it.
6. Insert the fuel injection pump (25) and tighten the
bolts (22).
Installation Notice
Tightening Torque
7. Remove the locking screw (32).
YAD1FD60
8. Tighten the bolt (12).
Installation Notice
Tightening Torque
YAD1FD70
9. Insert the washer (21) and tighten the bolts (20)
and then remove the assembly cage 601 589 05
14 00 (29).
Installation Notice
Tightening Torque
YAD1FD80
10. Connect the fuel pipes
Installation Notice
Return Line (5)
Fuel Injection Line (15)
Fuel feed Line (3)
Suction and Pressure Line (4)
Replace the seal.
11. Assemble the plastic clip (8).
YAD1FD90
23 N•m (17 lb-ft)
23 N•m (17 lb-ft)
46 N•m (34 lb-ft)
13 N•m (10 lb-ft)
18 N•m (13 lb-ft)
13 N•m (10 lb-ft)
13 N•m (10 lb-ft)
SSANGYONG Y200