Drum Brake Assembly - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

4C-16 REAR BRAKE

DRUM BRAKE ASSEMBLY

1. Remove the tires

Park the vehicle on the flat ground and fix the

vehicle not to move it.

Position the transmission in NEUTRAL.

2. Disconnect the brake pipe from the rear brake.

Notice: Be carefully to prevent the brake fluid loss

and contamination.

3. Insert the bolt (M8) to the service hole of the brake

drum and remove the brake drum.

4. Remove the service hole plug of the axle shaft.

SSANGYONG Y200

Table of Contents