SSANGYONG Rexton Y200 Manual page 167

1B2-6 M161 ENGINE MECHANICAL
15. Disconnect the terminals from starter motor and
remove the starter motor.
16. Disconnect the engine main harness ground.
YAD1B120
17. Disconnect the engine ground wire.
YAD1B130
18. Disconnect following sensors connector.
•
HFM sensor.
•
Coolant temperature sensor.
•
Knock sensor.
•
Camshaft and crankshaft sensors.
YAD1B5A0
19. After removing the ignition coil cover, disconnect
the ignition coil connector.
20. Remove the harness cover and disconnect the 4
injection valve connectors. Disconnect the main
harness.
YAD1B5B0
SSANGYONG Y200