SSANGYONG Rexton Y200 Manual page 110

SSANGYONG Y200
M162 ENGINE MECHANICAL 1B1-69
4. Align the holes on intake and exhaust camshaft
to the hole on cylinder head. Insert the holding
pin DW 110-120 into the holes.
YAD1B0Q0
5. Turn the intake camshaft adjuster to the direction
of camshaft rotation by hard until it stops and then
install the chain.
Notice:
•
Make sure that the camshaft sprocket and
timing chain are aligned with marks.
•
Intake camshaft adjuster should be in retarded
position.
YAD1B0R0
6. Install the chain on the exhaust sprocket and
tighten the sprocket bolts.
Installation Notice
Tightening Torque
•
Make sure that the camshaft sprocket and
timing chain are aligned with marks.
•
Replace the sprocket bolt with new one.
YAD1B600
7. Install the chain tensioner screw plug (1) and chain
tensioner assembly (2) and tighten it as specified.
Installation Notice
Tightening Torque
YAD1B0S0
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step: 90° ± 5°
(1) : 40 N•m (30 lb-ft)
(2) : 72 - 88 N•m
(53 - 65 lb-ft)