SSANGYONG Rexton Y200 Manual page 198

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-37
Tools Required
602 589 00 40 00 Engine Lock
Removal & Installation Procedure
1. Adjust the piston of number 1 cylinder to the TDC.
YAD1B6V0
2. Remove the start motor and install the engine lock
602 589 00 40 00 to the flywheel ring gear.
3. Remove the vibration damper center bolt.
Installation Notice
Tightening Torque
YAD1B680
4. Remove the vibration damper assembly using the
puller.
5. Installation should follow the removal procedure
in the reverse order.
Notice: If possible, don't separate the vibration
damper and the pulley.
YAD1B6W0
1st step: 200 + 20 N•m
(148 + 15 lb-ft)
2nd step: 90° + 10°