SSANGYONG Rexton Y200 Manual page 993

Power Flow - Park and Neutral
In Park and Neutral, there is no drive to the planetary
gear set. The rear band is applied to eliminate 'clunk'
on engagement of the reverse gear, and to improve
the low range engagement for 4WD applications. No
other clutches or bands are applied.
In Park the transmission is mechanically locked by
engaging a case mounted pawl with teeth on the output
shaft ring gear.
Control
To maintain this arrangement in the steady state sole-
noids and valves are activated as follows:
•
Solenoids S1 and S2 are switched OFF.
Gear State
Park and Neutral
SSANGYONG Y200
C1 C2 C3
- - -
AUTOMATIC TRANSMISSION 5A-21
•
Line (pump) pressure is applied to the Primary Regu-
lator Valve (PRV) and to the solenoid supply
pressure regulator valve.
•
The converter, oil cooler, and lubrication circuits are
charged from the primary regulator valve.
•
The line 500 circuit is charged by the solenoid
supply pressure regulator valve.
•
The S5 circuit is charged by the variable pressure
solenoid (S5).
•
Line pressure is prevented from entering the drive
circuit by the manual valve.
•
The B1 circuit and all clutch circuits are open to ex-
haust.
ELEMENTS ENGAGED
C4 B1 B2
- - X
1-2 3-4 LU
OWC OWC CLUTCH
- - -
KAA5A320