SSANGYONG Rexton Y200 Manual page 304

1B3-36 DIESEL ENGINE MECHANICAL
33. Remove the chain tensioner and seal.
YAD1BC60
34. Remove the bolt and separate the drive sprocket.
Notice: During removal, be careful not to drop the
sprocket and chain into the timing case.
Carefully pull off the chain and then pull out the
sprocket.
YAD1BC70
35. Remove the camshaft bearing cap bolts according
to the numerical sequence.
Notice: Remove the No.1 bolts first and then
remove the No. 2 bolts. Do not remove the bolts
at a time completely but remove them step by
step evenly or camshaft can be seriously
damaged.
YAD1BC80
36. Remove the bearing caps and then pull out the
camshaft(20) upward.
Notice: Be careful not to miss the locking washer.
37. Remove the locking washer.
Notice: Check the locking washer and replace if
necessary.
YAD1BC90
SSANGYONG Y200