SSANGYONG Rexton Y200 Manual page 761

3A-12 FRONT AXLE
4. Remove the two knuckle-brake caliper assembly
mounting blots and pull off the caliper assembly.
Notice: Be careful not to damage the brake oil hose.
YAD3A080
5. Vehicle with pant time transfer case only
•
Remove the hub mounting bolt & washer and
pull off the hub cover.
YAD3A090
•
Remove the retainer ring & outer shin in the
drive shaft and pull off the lock.
Notice: For assembly, adjust the clearance
between the snap ring & hub not to exceed 0.2mm.
(Shim thickness : 0.2, 0.3, 0.5, 1.0mm)
Notice: For assembly, be careful not to damage
O-ring of the locking hub.
YAD3A100
•
Detach the vacuum hose of locking hub from
steering knuckle.
YAD3A110
SSANGYONG Y200