Table of Contents
Advertisement
1B3-62 DIESEL ENGINE MECHANICAL
5. Install the timing sensor bracket.
Refer to "TDC Setting" in this section.
YAD1BE10
6. Install the cooling fan pulley.
Installation Notice
Tightening Torque
7. Install the cooling fan.
8. Install the fan belt.
9. Remove the engine lock 602 589 00 40 00.
YAD1BE20
10. Throughly clean the mounting bore of the radial
seal.
11. Coat a little oil on the sealing lip of new radial (1)
and contact surface.
Notice: Don't use grease.
12. Install the radisl seal (1) by using a sleeve 601
589 03 14 00 (4).
Notice: Align the groove of sleeve and woodruff
key (arrow).
YAD1BE30
Notice: The sealing lip of the repair radial seal is
offset to the inside by 2 mm to ensure that is does
not run in any groove which the standard radial
seal may have left on the crankshaft flange.
A Standard Radial Seal
B Repair Radial Seal
YAD1BE40
10 N•m (89 lb-in)
SSANGYONG Y200
Advertisement
Chapters
Table of Contents
