Piston - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

1B3-82 DIESEL ENGINE MECHANICAL

Preceding Work:

Removal of the cylinder head

Removal of the oil pump

4 Snap Ring .............................................. Replace

5 Piston Pin

6 Piston

Notice: There are two kinds of connecting rods (for machining) and they are different in weight approx. 15g.

When replacing the connecting rod, measure its weight and ensure that a engine has the same weight of connecting

rods. If not, there would be a unbalancing of engine.

7 Connecting Rod Bushing .......................... Check

8 Connecting Rod

9 Connecting Rod Upper Bearing Shell

10 Connecting Rod Lower Bearing Shell

11 Connecting Rod Bearing Cap

12 Connecting Rod Bolt ...... 35 N•m (26 lb-ft)+ 90°

SSANGYONG Y200

Table of Contents