SSANGYONG Rexton Y200 Manual page 765

3A-16 FRONT AXLE
•
Install the front disc and tighten the hub nut &
washer. When you install then, align the hub
nut-washer to the shaft end and tighten the hub
nut as the specified torque. After bending the
groove part of shaft, apply the painting and
grease to the groove part.
Installation Notice
Tightening Torque
YAD3A230
6. With part time transfer case
•
Install the brake disc assembly and tighten the
fixing bolts.
Installation Notice
Tightening Torque
•
Install the disc brake caliper assembly to the
brake disc.
•
Align the hub body to the flange mounting hole
and insert it into the shaft.
Notice: When you insert the hub body, check the
YAD3A240
o-ring for the damage.
•
Insert the shin in order that the clearance
between snap ring and hub cover does not
exceed Max 0.2mm on condition that you pull
the shaft completely in outside direction. Fix
the hub body using the snap ring.
Shim thickness
Max. clearance
YAD3A250
•
Install the hub cover to the body and tighten it
as the specified torque.
Installation Notice
Tightening torque
YAD3A260
250 - 350 N•m
100 - 130 N•m
0.2, 0.3, 0.5, 1.0 mm
0.2 mm
50 - 60 N•m
(37 - 44 lb-ft)
SSANGYONG Y200