Oil Pump - SSANGYONG Rexton Y200 Manual

Preceding Work : Removal of oil pan
1 Bolt (M8 x 20, 1 piece)
..................................... 29-35 N•m (21-26 lb-ft)
2 Sprocket (Oil Pump Drive)
SSANGYONG Y200
M162 ENGINE MECHANICAL 1B1-99

OIL PUMP

3 Bolt (M8 x 35, 3 pieces)
.......................... 22.5-27.5 N•m(16.6-20.3 lb-ft)
4 Spring Pin
5 Oil Pump
Removal & Installation Procedure
1. Remove the bolt (1) from the oil pump drive
sprocket (2) and separate the gear and the oil
pump drive chain.
Installation Notice
Tightening Torque
2. Unscrew the oil pump mounting bolts (3).
Installation Notice
Tightening Torque
YAD1B3F0
Tighten the baffle plate and the oil pump with the
two bolts in right side first, and then tighten the
other bolt.
3. Remove the oil pump and oil strainer assembly.
4. Replace the strainer in oil pump if necessary.
5. Installation should follow the removal procedure
in the reverse order.
YAD1B3E0
29 - 35 N•m
(21 - 26 lb-ft)
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)