SSANGYONG Rexton Y200 Manual page 651

SSANGYONG Y200
DIESEL ENGINE CONTROLS 1F3-27
Tools Required
617 589 04 21 00 Tester
1. Disconnect the fuel line (2) from the fuel filter.
2. Remove the banjo bolt (4) from the fuel injection
pump and remove the seals (3) and fuel line (2).
YAD1FB90
3. Connect the tester 617 589 04 21 00 (5).
4. Start the engine and read off the fuel pressure on
tester 617 589 04 21 00 (5).
At Idle Speed
At Full Load
Notice: If out of standard, replace the fuel feed
pump.
YAD1FBW0
5. Stop the engine.
6. Remove the tester 617 589 04 21 00.
7. Replace the seal and connect the fuel line (2).
Inatallation Notice
Tightening Torque
YAD1FBA0
> 0.3 bar
> 0.5 bar
13 N•m (10 lb-ft)