SSANGYONG Rexton Y200 Manual page 671

SSANGYONG Y200
DIESEL ENGINE CONTROLS 1F3-47
Tools Required
001 589 65 09 00 Serration Wrench
Removal & Installation Procedure
1. Remove the plastic clip from the injection pipe
2. Remove the fuel return hose (5).
3. Remove the plug(3).
YAD1BFC70
4. Disconnect the injection pipes from the injection
nozzles and push them to the side.
Installation Notice
Tightening Torque
YAD1BFC80
5. Remove the fuel injection nozzle (4) with serration
wrench 001 589 65 09 00.
Installation Notice
Tightening Torque
YAD1BCU0
6. Replace the washers (6).
7. Installation should follow the removal procedure
in the reverse order.
Notice: Pay attention to the installation position
of new nozzle washer and tightening torque.
YAD1BFC90
18 N•m (13 lb-ft)
35 - 40 N•m
(26 - 30 lb-ft)