SSANGYONG Rexton Y200 Manual page 943

4E-64 ABS AND TCS
DIAGNOSTIC TROUBLE COED (DTC) 060/065 - LEFT FRONT INLET AND
Circuit Description
The solenoid valve coil circuits are supplied with power
from the battery when the valve relay is energized.
Switched ground is provided by the electronic brake
control module (EBCM) to each coil.
Diagnosis
This procedure checks whether the left front inlet and
outlet valves are functioning.
Cause
•
A valve has failed.
•
A solenoid coil is open or shorted.
OUTLET VALVE SOLENOID FAULT
Action Taken When the DTC Sets
ABS is disabled, and the ABS warning lamp is turned
ON for the remainder of the ignition cycle. If the failure
is intermittent, the EBCM will enable the system at the
next ignition cycle and set a history DTC.
Test Description
The number(s) below refer to step(s) on the diagnostic
table.
1. This step begins the test of the inlet valve
3. This step tests the outlet valve.
YAD4E230
SSANGYONG Y200