SSANGYONG Rexton Y200 Manual page 678

1F3-54 DIESEL ENGINE CONTROLS
8. Remove the chain tensioner (17).
Installation Notice
Tightening Torque
Replace the seal (16).
YAD1FCL0
9. Pull out the 12-sided stretch bolt (14) and washer
and remove the camshaft sprocket (12).
YAD1FCM0
10. Pull out the bolt (11) and washer (10).
Notice: Be careful that the bolt is left-hand thread.
YAD1FCN0
11. Using special tool (Sliding Hammer 116 589 20
33 00 - 24,Threaded bolt 116 589 02 34 00 - 25),
remove the locking pin (8).
YAD1FCP0
80 N•m (59 lb-ft)
SSANGYONG Y200