4A-20 BRAKE SYSTEM
STOPLAMP SWITCH
Removal & Installation Procedure
1. Disconnect the negative battery cable.
2. Separate the stoplamp switch from the connector.
YAD4A460
3. Remove the stoplamp switch nut and disconnect
the switch.
YAD4A470
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque
YAD4A480
BRAKE PEDAL
Removal & Installation Procedure
1. Remove the bolts/nuts mounting the brake pedal
and disconnect the cotter pin.
YAD4A490
21 - 35 N•m
(15 - 26 lb-ft)
SSANGYONG Y200