SSANGYONG Rexton Y200 Manual page 1054

5A-186 AUTOMATIC TRANSMISSION
11. Assemble the clutch plates and discs into the
cylinder in the following sequence :
•
Steel plate
•
Friction disc
•
Steel plate
•
Steel plate (0574-000013, `014, `015, `016, `019,
`022), or Friction disc (0574-000012, `017)
•
Steel plate (selective)
•
Friction disc
•
Steel plate (selective)
•
Friction disc
KAA5A0R0
12. Align and fit the pressure plate with the
counterbore facing away from the clutch plates.
13. Install the circlip.
14. Check the C3 clutch clearance using 0555-336260
clutch pack clearance kit in the following manner
(weight only).
a. Place the weight on the pressure plate and
measure the distance from the end of the
cylinder to the top of the pressure plate.
b. Record this figure.
c. Remove the weight.
d. Lift the pressure plate up against the circlip
and measure the distance from the end of the
cylinder to the top of the pressure plate.
KAA5A0S0
e. Record this figure.
f. Subtract the second reading from the first read-
ing to obtain the clutch pack clearance.
SSANGYONG Y200